30C02CH no.7363-1/4 applications ? low-frequency amplifier, high-speed switching, small motor drive. features ? large current capacitance. ? low collector-to-emitter saturation voltage (resistance). r ce (sat) typ=330mw[i c =0.7a, i b =35ma]. ? ultrasmall package facilitates miniaturization in end products. ? small on-resistance (ron). specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit collector-to-base voltage v cbo 40 v collector-to-emitter voltage v ceo 30 v emitter-to-base voltage v ebo 5v collector current i c 700 ma collector current (pulse) i cp 1.4 a collector dissipation p c mounted on a ceramic board (600mm 2 5 0.8mm) 700 mw junction temperature tj 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit collector cutoff current i cbo v cb =30v, i e =0 100 na emitter cutoff current i ebo v eb =4v, i c =0 100 na dc current gain h fe v ce =2v, i c =50ma 300 800 gain-bandwidth product f t v ce =10v, i c =50ma 540 mhz marking : cl continued on next page. npn epitaxial planar silicon transistor ordering number : enn7363 30C02CH o2203 ts im ta-100140 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. low-frequency general-purpose amplifier applications package dimensions unit : mm 2150a [30C02CH] sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan 1 : base 2 : emitter 3 : collector sanyo : cph3 0.05 0.9 0.7 0.2 1.6 0.6 0.6 1.9 1 2 3 2.8 0.2 2.9 0.15 0.4 sanyo electric co.,ltd. semiconductor bussiness headquaters tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan http://semicon.sanyo.com/en/network
30C02CH no.7363-2/4 continued from preceding page. ratings parameter symbol conditions min typ max unit output capacitance cob v cb =10v, f=1mhz 3.3 pf collector-to-emitter saturation voltage v ce (sat) i c =200ma, i b =10ma 85 190 mv base-to-emitter saturation voltage v be (sat) i c =200ma, i b =10ma 0.9 1.2 v collector-to-base breakdown voltage v (br)cbo i c =10 m a, i e =0 40 v collector-to-emitter breakdown voltage v (br)ceo i c =1ma, r be = 30 v emitter-to-base breakdown voltage v (br)ebo i e =10 m a, i c = 0 5v turn-on time t on see specified test circuit. 35 ns storage time t stg see specified test circuit. 255 ns fall time t f see specified test circuit. 40 ns switching time test circuit v r r b v cc =12v v be = --5v + + 50 input output r l 220 f 470 f pw=20 s i b1 d.c. 1% i b2 20i b1 = --20i b2 =i c =300ma 1.0 10 100 1000 3 2 57 3 2 57 3 2 57 1000 100 2 3 5 7 h fe -- i c it05084 0 0 500 400 300 700 600 200 200 100 0 300 400 200 800 700 600 500 100 500 1000 800 900 100 300 400 600 700 i c -- v ce it05082 0 0.2 0.4 0.6 0.8 1.0 i c -- v be it05083 v ce (sat) -- i c it05085 i b =0 200 a 400 a 1ma 2ma 3ma 5ma 7ma 10ma 50ma 15ma 30ma 20ma ta=75 c --25 c 25 c ta=75 c --25 c 25 c v ce =2v v ce =2v 2 3 5 7 2 3 5 7 10 1.0 100 2 3 5 7 1000 1.0 23 5 10 100 1000 7 2357 2357 75 c --25 c ta=25 c i c / i b =20 collector current, i c -- ma dc current gain, h fe collector-to-emitter voltage, v ce -- mv collector current, i c -- ma base-to-emitter voltage, v be -- v collector current, i c -- ma collector current, i c -- ma collector-to-emitter saturation voltage, v ce (sat) -- mv
30C02CH no.7363-3/4 it05089 f t -- i c 100 1000 7 3 5 2 10 1.0 100 23 57 23 57 1000 23 57 v ce =10v cob -- v cb it05088 2 10 1.0 7 3 5 1.0 10 23 5 23 5 7 f=1mhz v ce (sat) -- i c v be (sat) -- i c it05086 it05087 10 100 1000 7 5 3 2 7 5 3 2 1.0 23 5 10 100 1000 7 23 5 7 23 5 7 1.0 0.1 10 3 2 5 7 3 2 5 7 1.0 23 5 10 100 1000 7 23 5 7 23 5 7 i c / i b =50 i c / i b =20 75 c --25 c ta=25 c 75 c ta=--25 c 25 c collector current, i c -- ma output capacitance, cob -- pf collector-to-base voltage, v cb -- v gain-bandwidth product, f t -- mhz collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- ma collector current, i c -- ma base-to-emitter saturation voltage, v be (sat) -- v p c -- ta it05091 0 800 600 700 500 300 400 100 200 0 20 40 60 80 100 120 140 160 mounted on a ceramic board(600mm 2 5 0.8mm) collector dissipation, p c -- mw ambient temperature, ta -- c base current, i b -- ma ron -- i b on resistance, ron -- f=1mhz 0.1 0.1 it06793 10 7 5 3 2 7 5 3 2 1.0 3 2 57 3 2 57 1.0 10 out in 1k 1k i b
30C02CH no.7363-4/4 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of october, 2003. specifications and information herein are subject to change without notice. ps
|
